Nux Duo Time Stereo Delay Pedal
7,327.58TLKDV dahil
3 ürünler Stokta Show extra info for delivery time
Açıklama
Nux Duo Time Stereo Delay Pedal
Duotime is a true stereo delay pedal with independent time/sub-division and repeat knobs. In the 80s, professional musicians used rack effects for stereo delay. Delay rack systems such as the Lexicon Delta, TC2290, Eventide H3000 and more were the golden age of engineering. Fast forward to today, musicians are looking for a more compact and simpler stereo delay pedal that they can control themselves. That's why NUX developed the two-stroke Dual Delay Engine to meet the general needs.
Level Knob:
Controls the Delay Mix level. When using Enter Loop mode, the Level knob becomes the Loop Level knob to control the volume of the Pharse Loop.Parameter Knob:
For Analog Delay, controls the Modulation depth. Increase for wider modulated sounds.Delay Time Knob
This Knob is a 5 way rotary switch. It allows you to select the delay type from Analog, Tape, Digi, Mod. and Verb.Tap Footswitch
Press this pedal to adjust speed and delay subdivision. You can adjust the target subdivision with the Time 1 and Time 2 buttons, then Tap this pedal to adjust the speed. Delay 1 and Delay 2 will change the delay time according to the current subdivision. Press and hold this pedal for 2 seconds to change the delay time between MS and BPM.OLED Display
Shows the Delay type on the display and the delay time in MS/BPM.Loop Mode
Press the On and Tap pedals simultaneously to enter/exit Pharse Loop mode. Press the On pedal to activate REC/Play/DUB in loop mode, and hold Undo/Redo as a regular looper pedal. The OLED display shows your phrase loop status. The Level knob becomes Loop Level to adjust Pharse volume. All other knobs operate independently in normal mode.Time 1
Controls the delay time of Delay 1. When in Tap Tempo it will be a subdivision relative to the current parameter.Repeat 1
Controls the number of times Delay 1 repeatsTime 2
Controls the delay time of Delay 1. When in Tap Tempo it will be a subdivision relative to the current parameter.Repeat2
Controls the number of times Delay 1 repeats
TECHNICAL SPECIFICATIONS
SAMPLING RATE
48kHz
A/D CONVERTER
32-bit
SIGNAL PROCESSING
32-bit
FREQUENCY RESPONSE
20Hz~20kHz - ±1dB
MAXIMUM ENTRY LEVEL
10dBu/2.8Vrms
INPUT IMPEDANCE
5MΩ
SYSTEM DELAY
1ms
MAXIMUM OUTPUT LEVEL
10dBu/2.8Vrms
OUTPUT IMPEDANCE
1kΩ
DYNAMIC RANGE
102dBu
DIMENSIONS
105(L)X115(W)X58(H)mm - 440gr